Coal Handling - Gallery

	These three photos show part of a coal handling installation for a dairy factory, consisting of: a 40 tonne reception hopper a 20m high bucket elevator a 60 tonne day hopper transfer conveyors rated at 30tph.
	This installation is similar to that shown above, except that the coal is distributed into two separate day hoppers. With both installations the transfer system is rated at 30tph. All the conveyors and the elevator are fitted with VSDs and are all fully enclosed to contain the coal dust.
The installation to the right consists of a 30 tonne in-ground bunker, a 200mm diameter bunker extract auger, a 13.5m high 8tph bucket elevator, a fully enclosed transfer scraper conveyor and a 6 tonne elevated day hopper. The boiler feed auger from the day hopper is controlled by the boiler demand for fuel.

 Typical belt conveyor.